|
ORDERING INFO
Due to high demand for this product, please email or call for availability
and shipping options.
E-Mail
twr@exrest.com
Phone
(321) 253-5841
|
How
long will it take for the customer to know the Chill Tech is working for
him?
Almost immediately... There
is no breaking in period. The moment the customer has the Chill Tech installed;
it is working. There is no break-in period. The essence of simplicity is
generally what works!
Today, GREEN
is the issue... This product is about as green as it gets!
Remember, there are no electrical
hook ups, the unit is self cleaning, reduces water consumption, increase’s
capacity, has no moving parts, is maintenance free and is simple to install
to new or in particular existing installations.”
The
exclusive ChillTech systems will significantly reduce water temperature
to incoming ice makers. This will reduce ice maker cycle times while increasing
the ice making capacity of ice maker up to 30%.
|
|
The exclusive ChillTech Water treatment
system lowers water temperature to incoming ice makers.
This results in significantly reduced ice maker cycle
times while lowering the KWH consumption up
to 30% and increasing ice making capacity
up to 30% or more!
-
Increases ice production up
to 30% or more!
-
Lowers KWH consumption by up
to 30%
-
Stand alone product
-
No Electricity required
-
Easily connects to cold water
feed line
-
2 year parts warranty
Performance on all ice machines
is measured by ambient air temperature and incoming water temperature.
We have found CHILL TECH not only reduces freeze times but also increased
harvest weight which in turn reduces the amount of water purged at cycles
end.
SIMPLE
DESIGN
-
Simple to add on to existing
or new ice machines.
-
Designed to sit on the floor
or attached via a simple clamp to the side of the bin for additional support.
-
Fast installation.
-
Attaches to existing drain line.
-
No Maintenance!
Temperature Reduction
This means a highly reduced
KWH consumption per 100 pounds of ice and a reduction in gallons of water
used per pounds of ice harvested. The exclusive chilltech system will significantly
reduce water temperature to incoming ice makers. This will reduce ice maker
cycle times while increasing the ice making capacity of the ice maker up
to 30 percent
Installation requires nothing
more than taking the existing drain tubing from the icemaker itself and
installing it to the inlet line and then installing the continuation drain
line to the drain. The inlet potable water line to the icemaker needs to
be routed to the marked flare fitting and the continuation to the icemaker
from the flare fittings. It would be a advisable, although not necessary
to wrap the continuing water line to the icemaker with insulation. This
would maintain the cold temperatures the CHILL TECH brings to the icemaker.
An ice maker installed with a Systems IV ChillTech will reduce freeze times.
Cooler temperatures mean less heat. Heat is wear.
So, the customer can expect
to find lower temperatures surrounding the icemaker - the condenser if
air- cooled will discharge a slightly cooler air since it has less heat
to
remove due to the lighter
load or temperature of the water. All the components will last longer as
they are now operating for a shorter period of time.
|
